moOde

System Config

 for software update

General
Length 3-63 chars, alphanumeric and hyphen allowed.
System Modifications
On-demand: Scale CPU frequency from min to max based on load.
Performance: Run the CPU at max frequency.
NOTE: The 64-bit kernel is an experimental option for Allo USBridge SIG, Pi-4, Pi-3, and Pi-2B rev 1.2 boards.
For ARM6 platforms (Pi-1B, Zero/w, etc) select Devmon, otherwise select Udisks-glue (Default).
The integrated adapter appears on Pi-4, Pi-3 and Pi-Zero W models.
The integrated adapter appears on Pi-4, Pi-3 and Pi-Zero W models.
Leaving the HDMI port ON uses +25 mA and lengthens boot time.
LED0 default trigger is SDCard (mmc0) activity.
LED1 default trigger is default-on for Power.
Wait for up to the specified number of seconds for an IP address to be assigned to an adapter during moOde startup.
NOTE: AP mode will be started if the WLAN adapter has not been assigned an IP address providing an IP address has not also been assigned to the Ethernet adapter.
Wait for up to "IP addr timeout" seconds for an address to be assigned to the Ethernet adapter.
Default is NO which will skip the IP address check for the Ethernet adapter and shorten boot time.
File system has not been expanded yet Expand root file system to maximum size of storage device.
- The system will automatically restart after the expansion request has been queued.
- Actual file system expansion occurs during restart and may take some time.
USB boot is enabled Programs Pi-3B OTP memory to enable booting from USB drive.
- This is a pernament modification and only needs to be done once.
- After OTP is updated, system can boot from SD card or USB drive.
Local Display
Display moOde UI on locally attached display.
This prevents the cursor from showing on the display or Touch screen
Wake the display when audio starts playing.
Backlight brightness for 7" Pi Touch. Values are 0 - 255.
Rectangular (default) or square pixels for 7" Pi Touch.
Clear Chrome Browser cache for Local UI.
Show or hide the CoverView screen saver.
Local Services
Maintain enhanced metadata in /var/local/www/currentsong.txt file
for consumption by external applications.
The LCD update engine runs lcdup.py script whenever UI state changes.
 A stub lcdup.py script is located in /var/local/www/commandw.
Maps attached hardware buttons to MPD playback or other commands. By @Cyanoazimin.
 GPIO pin mappings
Web based SSH terminal server using Shellinabox by Markus Gutschk and Luka Krajger.
Open Web SSH terminal
Backup/Restore
Backup settings, radio stations and CamillaDSP configs.
Restore settings, radio stations and CamillaDSP configs.
System Maintenance
Clear the playback history log. Perform this task periodically since the log grows over time.
Clear various system log files. NOTE: The logs are cleared periodically by the automatic Maintenance task.
Compact the Sqlite database for best performance. NOTE: The database is compacted periodically by the automatic Maintenance task.
Increase the level of detail in moode log.
Reconnect
Reconnect System restarted
Reconnect System shut down