moOde

GPIO Config

NOTE: Use a comma to delimit arguments in the CMD field. Example: mpc,load,My Playlist SAVE: Update the button configuration and restart GPIO button handler.

GPIO Pins

- The GPIO button handler configures pins as input / pull-up.
- The pins are 3V3. Pins GPIO2 and GPIO3 have fixed pull-up resistors.
- At power on the pins are set to input mode, pins 0-8 are pull-ups to 3V3, pins 9-27 are pull-downs to 0V.
Settings
PIN 
CMD 
PIN 
CMD 
PIN 
CMD 
PIN 
CMD 
PIN 
CMD 
PIN 
CMD 
PIN 
CMD 
PIN 
CMD 
(ms) Bounce time in miliseconds (ms). This parameter is used to ignore all subsequent changes for the bounce time after the first change is reported.
Reconnect
Reconnect System restarted
Reconnect System shut down